[<<][davinci][>>][..]
Sat Jun 15 17:01:23 EDT 2013

BeagleBoard-XM boot console log


Texas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)

OMAP36XX/37XX-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment


In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #2fa800029ff80000016842c91001a021
Hit any key to stop autoboot:  0 
OMAP3 beagleboard.org # boot
boot
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

134 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3194256 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3194192 Bytes = 3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................................................................................................ done, booting the kernel.
[    0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Thu Mar 17 08:56:19 CET 2011
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[    0.000000] Beagle expansionboard: none
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 496256KB available (5884K code, 671K data, 204K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Calibrating delay loop... 505.22 BogoMIPS (lpj=1974272)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] OMAP3 Beagle Rev: xM C
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] omap_init_mbox: platform not supported
[    0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
[   69.861450] OMAP DMA hardware revision 5.0
[   69.867645] bio: create slab <bio-0> at 0
[   69.868896] SCSI subsystem initialized
[   69.870208] usbcore: registered new interface driver usbfs
[   69.870452] usbcore: registered new interface driver hub
[   69.870635] usbcore: registered new device driver usb
[   69.883514] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[   69.886169] twl4030: PIH (irq 7) chaining IRQs 368..375
[   69.886230] twl4030: power (irq 373) chaining IRQs 376..383
[   69.886505] twl4030: gpio (irq 368) chaining IRQs 384..401
[   69.888244] regulator: VUSB1V5: 1500 mV normal standby
[   69.888488] regulator: VUSB1V8: 1800 mV normal standby
[   69.888702] regulator: VUSB3V1: 3100 mV normal standby
[   69.889984] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   69.890441] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[   69.890716] regulator: VDAC: 1800 mV normal standby
[   69.890960] regulator: VPLL2: 1800 mV normal standby
[   69.891235] regulator: VSIM: 1800 <--> 3000 mV normal standby
[   69.891601] regulator: VAUX3: 1800 mV normal standby
[   69.891967] regulator: VAUX4: 1800 mV normal standby
[   69.892150] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[   69.892456] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[   69.893768] Switching to clocksource 32k_counter
[   69.903045] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[   69.907073] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   69.907104] musb_hdrc musb_hdrc: MUSB HDRC host driver
[   69.907257] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[   69.907409] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   69.907470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   69.907501] usb usb1: Product: MUSB HDRC host driver
[   69.907531] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[   69.907562] usb usb1: SerialNumber: musb_hdrc
[   69.908203] hub 1-0:1.0: USB hub found
[   69.908264] hub 1-0:1.0: 1 port detected
[   69.909332] NET: Registered protocol family 2
[   69.909637] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   69.910186] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   69.910614] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   69.910858] TCP: Hash tables configured (established 16384 bind 16384)
[   69.910888] TCP reno registered
[   69.910919] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   69.910980] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   69.911224] NET: Registered protocol family 1
[   69.911682] RPC: Registered udp transport module.
[   69.911712] RPC: Registered tcp transport module.
[   69.911743] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   69.912658] omap-iommu omap-iommu.0: isp registered
[   69.914398] VFS: Disk quotas dquot_6.5.2
[   69.914520] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   69.915618] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   69.916442] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   69.917297] msgmni has been set to 969
[   69.921051] alg: No test for stdrng (krng)
[   69.921386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   69.921417] io scheduler noop registered
[   69.921447] io scheduler deadline registered
[   69.921630] io scheduler cfq registered (default)
[   69.979980] OMAP DSS rev 2.0
[   69.980072] OMAP DISPC rev 3.0
[   69.980133] OMAP VENC rev 2
[   69.980377] OMAP DSI rev 1.0
[   70.316894] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   70.334991] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[   70.352478] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[   70.369903] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[   70.950469] console [ttyS2] enabled
[   70.960662] brd: module loaded
[   70.967010] loop: module loaded
[   70.971527] omap2-nand driver initializing
[   70.976013] No NAND device found!!!
[   70.979705] No NAND device found!!!
[   70.984252] usbcore: registered new interface driver catc
[   70.989776] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   70.995849] usbcore: registered new interface driver kaweth
[   71.001495] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   71.009155] usbcore: registered new interface driver pegasus
[   71.014892] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   71.021911] usbcore: registered new interface driver rtl8150
[   71.027740] usbcore: registered new interface driver asix
[   71.033264] usbcore: registered new interface driver cdc_ether
[   71.039245] usbcore: registered new interface driver dm9601
[   71.044982] usbcore: registered new interface driver smsc95xx
[   71.050903] usbcore: registered new interface driver gl620a
[   71.056579] usbcore: registered new interface driver net1080
[   71.062408] usbcore: registered new interface driver plusb
[   71.068054] usbcore: registered new interface driver rndis_host
[   71.074127] usbcore: registered new interface driver cdc_subset
[   71.080169] usbcore: registered new interface driver zaurus
[   71.085906] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   71.093994] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   71.100860] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   71.106903] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[   71.114532] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   71.128295] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   71.134185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   71.141082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   71.148406] usb usb2: Product: OMAP-EHCI Host Controller
[   71.153808] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[   71.159271] usb usb2: SerialNumber: ehci-omap.0
[   71.164520] hub 2-0:1.0: USB hub found
[   71.168395] hub 2-0:1.0: 3 ports detected
[   71.198699] Initializing USB Mass Storage driver...
[   71.203826] usbcore: registered new interface driver usb-storage
[   71.209930] USB Mass Storage support registered.
[   71.214965] mice: PS/2 mouse device common for all mice
[   71.220642] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   71.228454] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[   71.239227] i2c /dev entries driver
[   71.243347] Linux video capture interface: v2.00
[   71.248352] omap-iommu omap-iommu.0: isp: version 1.1
[   71.254730] vpfe_init
[   71.257629] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   71.370849] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[   71.377929] Registered led device: beagleboard::usr0
[   71.383117] Registered led device: beagleboard::usr1
[   71.389709] Registered led device: beagleboard::pmu_stat
[   71.396789] usbcore: registered new interface driver usbhid
[   71.402496] usbhid: USB HID core driver
[   71.406524] Advanced Linux Sound Architecture Driver Version 1.0.21.
[   71.413482] usbcore: registered new interface driver snd-usb-audio
[   71.490661] No device for DAI omap-mcbsp-dai-0
[   71.495147] No device for DAI omap-mcbsp-dai-1
[   71.499694] No device for DAI omap-mcbsp-dai-2
[   71.504211] No device for DAI omap-mcbsp-dai-3
[   71.508697] No device for DAI omap-mcbsp-dai-4
[   71.513214] OMAP3 Beagle SoC init
[   71.517333] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[   71.528900] ALSA device list:
[   71.531921]   #0: omap3beagle (twl4030)
[   71.535919] oprofile: using arm/armv7
[   71.539825] TCP cubic registered
[   71.543151] NET: Registered protocol family 17
[   71.547668] NET: Registered protocol family 15
[   71.552276] lib80211: common routines for IEEE802.11 drivers
[   71.558044] ThumbEE CPU extension supported.
[   71.562347] Power Management for TI OMAP3.
[   71.566894] usb 2-2: new high speed USB device using ehci-omap and address 2
[   71.575042] Unable to set L3 frequency (400000000)
[   71.579956] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 MHz
[   71.587341] IVA2 clocking rate: 800 MHz
[   71.761138] SmartReflex driver initialized
[   71.765380] omap3beaglelmb: Driver registration complete
[   71.776184] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[   71.784515] registered taskstats version 1
[   71.886566] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[   71.893341] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   71.901306] hub 2-2:1.0: USB hub found
[   71.918762] Console: switching to colour frame buffer device 160x45
[   71.940795] hub 2-2:1.0: 5 ports detected
[   71.945343] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[   71.953155] regulator_init_complete: incomplete constraints, leaving VDAC on
[   71.961212] omap_vout omap_vout: probed for an unknown device
[   71.967529] Waiting for root device /dev/mmcblk0p2...
[   71.975341] mmc0: host does not support reading read-only switch. assuming write-enable.
[   71.983734] mmc0: new high speed SDHC card at address 1234
[   71.989715] mmcblk0: mmc0:1234 SA04G 3.63 GiB 
[   71.994537]  mmcblk0: p1 p2
[   72.087036] kjournald starting.  Commit interval 5 seconds
[   72.096405] EXT3-fs (mmcblk0p2): using internal journal
[   72.105560] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[   72.116546] VFS: Mounted root (ext3 filesystem) on device 179:2.
[   72.130157] devtmpfs: mounted
[   72.137145] Freeing init memory: 204K
INIT: [   72.245788] usb 2-2.1: new high speed USB device using ehci-omap and address 3
version 2.86 booting
[   72.378967] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[   72.390167] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   72.405517] smsc95xx v1.0.4
[   72.465820] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 12:ef:ea:61:c9:68
Please wait: booting...
Starting udev
[   72.566192] usb 2-2.2: new low speed USB device using ehci-omap and address 4
[   72.705657] usb 2-2.2: New USB device found, idVendor=03f9, idProduct=0100
[   72.717681] usb 2-2.2: New USB device strings: Mfr=4, Product=26, SerialNumber=0
[   72.730194] usb 2-2.2: Product: Keytronic USB Keyboard
[   72.740386] usb 2-2.2: Manufacturer: Key Tronic
[   72.769958] input: Key Tronic Keytronic USB Keyboard as /devices/platform/ehci-omap.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
[   72.787231] generic-usb 0003:03F9:0100.0001: input: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-ehci-omap.0-2.2/input0
[   72.886566] usb 2-2.4: new low speed USB device using ehci-omap and address 5
[   73.016815] usb 2-2.4: New USB device found, idVendor=045e, idProduct=0040
[   73.181121] usb 2-2.4: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[   73.604766] usb 2-2.4: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[   74.225280] usb 2-2.4: Manufacturer: Microsoft
[   75.030853] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input3
[   75.475128] generic-usb 0003:045E:0040.0002: input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-ehci-omap.0-2.4/input0
Remounting root file system...
Caching udev devnodes
Populating dev cache
[   86.258361] Bluetooth: Core ver 2.15
[   86.268371] NET: Registered protocol family 31
[   86.278167] Bluetooth: HCI device and connection manager initialized
[   86.289855] Bluetooth: HCI socket layer initialized
[   86.315704] Bluetooth: L2CAP ver 2.14
[   86.324951] Bluetooth: L2CAP socket layer initialized
[   86.350555] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   86.465698] NET: Registered protocol family 10
[   86.503692] Bluetooth: RFCOMM TTY layer initialized
[   86.514221] Bluetooth: RFCOMM socket layer initialized
[   86.524475] Bluetooth: RFCOMM ver 1.11
ALSA: Restoring mixer settings...
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
eth0      No such device

ifconfig: SIOCGIFFLAGS: No such device
usb0      no wireless extensions.

udhcpc (v1.13.2) started
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
Sending discover...
[   90.720184] usb0: link up, 100Mbps, full-duplex, lpa 0x4DE1
Sending discover...
Sending select for 1.2.3.120...
Lease of 1.2.3.120 obtained, lease time 3600
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
adding dns 1.2.3.254
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Apr 19 18:30:00 BST 2011
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
Configuring leds:
  beagleboard::pmu_stat: none
  beagleboard::usr0: heartbeat
  beagleboard::usr1: mmc0
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting Vixie-cron.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting internet superserver: xinetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Network connection manager daemon: NetworkManager.
Starting GNOME Display Manager gdm

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2010.7-test-20110220 beagleboard ttyS2

beagleboard login: 



[Reply][About]
[<<][davinci][>>][..]